| [Manufacturer] | Arrow Shark |
| [Purchase Info] | This Product is custom build to order, before you place the order, please contact us first for the detail of stock availability, shipping cost to your country, and the waiting time, we only take payment via bank wire transfer for all custom orders, we will email you our bank account information after you confirm the order, and your order will only be processed after the full payment is received. |
| [Brief Description] | This DX58- twin jet sport edition released has not only extended the possible way of play and more options for the RC boaters; it has also filled the gap of gas-powered twin jet setup in Arrow Shark RTR’s boat line,
There are many advantages of the twin jet setup boats over traditional twin drive boats; the most important one is the safety measures, the jet boat uses an impeller for the propulsion rather than a propeller which is used in other types of boats' drive systems. The impeller spins inside the pump cavity, making the boat safer for anyone near it in the water. The sleek and aerodynamic design of the DX58-Specter hull allows it to accelerate through the water with minimal resistance. The twin ultra-jet sport edition is powered by Arrow Shark X-60 inline engine with the latest version of the throttle control kit, the rapid throttle responding produces high torque and rev that provides efficient and powerful propulsion in order to maximize the high-pressure thrust to propel the boat through the water like a jet flying without a wing. The engine rail in this sport edition was made of carbon fiber, it is not only stronger than the billet but, also much lighter which lightens the complete boat weight for more speed, the design of this carbon rail will allow you to fit an Arrow Shark TS760-Marine electric starter to the X-60 inline engine in case you are uncomfortable with the pull starter set up, There is a gear-box between the twin ultra-jet and the X-60 inline engine in order to divide the power into two Jet drives, and they were connected by a 1/4 inches flexible shaft covered with a Teflon sleeve for the smooth power transfer. The DX-58 twin jet sport edition represents Arrow Shark's top line of luxury hardware and RC marine technology, it not only delivers outstanding performance and brings superb experience to the RC boaters., but it is also a truly “work of art” for display at any place. |
| [Kit Version & Contents] | Twin-Jet Sport Edition X-60 |
| [About Radio System] | Please note that all of the Arrow Shark 2020 RTR boats or Kits don't come with transmitter and receiver, you will need to provide your own prefer radio system. |
| [Hull] | Specter DX58 Hull ( Black Carbon Fiber or Yellow Kevlar) |
| [Engine Rail] | Carbon Fiber Rail |
| [Engine] | X-60 Marine Engine (Pro Version) |
| [Exhaust System] | Billet Turbo Box-B6X
Straight-Out Header x2 Silicone Header Sealing Kit |
| [Gear Box] | D2L-2V Gear Box |
| [Drive System] | Twin Ultra-Jet Gas Version
Scale Tab x1 Set |
| [Propeller] | 51mm Impeller |
| [Drive Accessories] | X-Pump with Connection tubes x2
Stuffing Tube x2 Flexible X60L x2 |
| [Gas Tank] | Mirror 1300 Gas Tank Kit & CNC Refueling port
Billet Mini Tank |
| [Radio Box & Parts] | E-Box
Metal Wire Connections Soft Cable Adaptor CNC Servo Arm Tie-bar Steering Cable & Sleeve 20KG Metal Gear Steering Servo x4 |
| [Building Accesories] | Hatch Latch x 1 set, Bilge Water Pick Up x2,
Billet Water Drainer x1, Water Tube x5 Meter Gas Tube 1 Meter, Hull Air Outlet Plates x4, CNC Water Tube Holders, All Installation Bolts&Nuts. |
| [Boat Stand] | Heavy Duty Mono Hull Stand |
| [Product Dimension] | Please check drawing picture above for the detail. |
| [Packing Dimension] | Length: 1600 Width: 435mm High: 320mm |
| [Product Weight] | Approximate 18.7KG |
| [Shipping Weight] | 45KG (This weight is converted from Packing Dimension) |
| [Assemble Info] | For the Un-assemble kit version, we will pack all parts listed above inside the hull, when customer receives the package, you need to build the boat up either according to our instruction or your own plan
For the RTR assemble version, in order to avoid the boat getting damage during the transportation, we will dis-assembled the transom hardware and package them inside the hull before shipping, therefore, when customer receives the package, it will require you to install the hardware back to transom according to our instruction manual. |
100%
NAN%
NAN%
This site is protected by copyright and trademark laws under US and international law.
all rights reserved ©2019-2029 Arrow Shark Inc
Most helpful comments（0）
No comment-