| [Manufacturer] | Arrow Shark |
| [Brief Description] | When high-speed electric RC boats run at full speed, the temperature of the LIPO battery will get increased dramatically, and it could get overheated within a few minutes, and an overheated LIPO battery affects its performance and lifespan, as well the overheated battery can be dangerous as it can catch fire or explode, due to you cannot observe its real-time temperature during operation, Therefore, the best solution for this challenge is keeping the battery cool at all time.
The c-60 cooling pad is specially designed to be easily adapted onto a 6S LIPO battery, the powerful twin 60mm size cooling fan effectively covers the entire battery and fully dissipates heat from the battery during operation. The smart portable design of the C-60 cooling pad is not only help the battery avoid from degrading and extend its lifespan but also be easy to set up, it almost uses no space inside of your boat, just simply securing it on your battery with Velcro ties and connect the wires to the control device. The control device for the C-60 is another innovative design from Arrow Shark, it is dual functions switch, click the switch to the “on” side, and it is manual control, the cooling fan will start to function immediately, click the switch to the “off” side and plug the signal wire into your receiver, then, it will become remote control, whichever receiver slot you plug the wire in, then, the C-60 will be controlled by that channel, this means even your RC system is an older type of two-channel version, you can still use C-60 by its “manual control” function. The price is for one sets of cooling pad as shown in the picture, which uses for two 6S LIPO batteries. |
100%
NAN%
NAN%
The Standard Kit will be sold without control box.
This site is protected by copyright and trademark laws under US and international law.
all rights reserved ©2019-2029 Arrow Shark Inc
Most helpful comments（0）
No comment-