Arrow Shark Drive System
(Scale Drive Section)

2016 M8 II Steerable Drive-Collector Edition

Even though we have been very successful with the first version of our M8 sterndrive which was released in 2013, we have since been putting into practice our belief that “There is no Best, only Better!” For the last nine months we have been working hard to indeed make the M8 even “better”. After much investment in details for re-designing the drive and in refinement of our production processes, we are very proud to introduce to worldwide RC boaters the M8 II Collector Edition!
More Detail

 

2016 Billet M8-Classics Version Steerable Drive

Arrow Shark Hobby is especially proud to announce the release of our new 2016 billet M8-Classic Version steerable stern drive. Following on from our highly successful M8 drive which released on year 2013, this latest design features new metallurgy and even more precise machining for internal strength and reliability along with a superb external finish that will add both eye-appeal and performance to your boat.
More Detail

 
Arrow Shark Outboard Dragon Drive- Red
The greater the time you dedicate to focusing on the creation and development of a new product, the more fine details you may discover that can be revised and improved. The more such issues you can attend to before the product is released, the more successful will be the product, and the happier will be your customers using it...the Dragon Drive can accommodate our potent XP254M marine engine or any Zenoah-compatible engine for outstanding performance.
More Detail
 
Arrow Shark Outboard Dragon Drive-Jet Black
The greater the time you dedicate to focusing on the creation and development of a new product, the more fine details you may discover that can be revised and improved. The more such issues you can attend to before the product is released, the more successful will be the product, and the happier will be your customers using it...the Dragon Drive can accommodate our potent XP254M marine engine or any Zenoah-compatible engine for outstanding performance.
More Detail
 

F1-11 Billet Outboard Drive
Our purpose in designing the F1-11 was simply to offer a high quality, sleek looking and durable outboard drive for the growing RC F1 (Formula One) gas tunnel market. Our exclusive design features an integral clutch for easier launching and retrieval, although this can be removed for more experienced racers who require the ultimate power-to-weight performance. When removed, the clutch is replaced by a provided square-insert collet......
More Detail

 
SR512 Stingray Drive
The new products just keep coming from the research and development team at Arrow Shark! This time we are very proud to introduce our latest stinger drive unit C the SR512 Stingray. Designed for industry-standard 1/4 inch shafts, the Stingray is CNC-machined from aircraft-quality alloys with a stainless steel barrel that screws in and out for simplified flex shaft maintenance. At the front of the drive is a removable housing for a 9mm stuffing tube, whilst another..
More Detail
 
X-Pilot Fully Extendable Rudder
Trimming a fast gas boat to run straight can be a frustrating process as you balance the effects of engine and prop torque and the positioning of transom hardware. Consideration has to be given as well to the inter-action caused by the relationship of the prop and rudder to both each other and to the back of the boat. Once youve mounted all your hardware on the transom, the best way to tune for straight running is to adjust the position of the rudder relative to the prop...
More Detail
 
Scale Twin-Ram Trim Tabs
Setting a new high standard for scale fidelity matched with effective operation, Arrow Shark has introduced these stunning replicas of the trim tabs used on full size offshore race boats. With fine detail machining and simulated dual hydraulic rams that control the angle of the tab plates, these units are easy to install and just as easy to manually adjust for fine tuning the ride angle of your boat. On larger hulls, dual tabs can be fitted on either side of the transom for even more effective control surface area....
More Detail
 

Arrow Shark GX-1 Gear Box for Scale RC Boats

The main body casing of the GX-1 is constructed with CNC machining and is anodized in red or black to be comparable with the color of Arrow Shark’s M8 scale sterndrives. The input shaft and gears are made from special materials with extra hardening to take gas engines up to 15hp without failing. ...

More Detail

 

Arrow Shark GX-2 Gear Box for Scale RC Boats

The GX-2 is a unique combination of our GX-1 Gear Box and our Clutch V3. This integrated design saves space in your boat, maximizes the performance of both products and looks great! The output shafts of the gear box have the same format as the crankshaft of your gas engine;

More Detail