Arrow Shark 2012 Outboard Drive F1-11
Stock#ASS0002

F1-11 Outboard Drive
Qty:
Price: $448.00

Sold Out
f1-11

Description

Introduction

We are very proud to release the 2012 second version of "work of art"-CNC Billet F1-11 Outboard Drive. In addition to our Arrow Shark Billet XP254M marine engine, just about any other 26cc Zenoah-mount-compatible engine can be easily fitted to the F1-11 Drive.
Our purpose in designing the F1-11 was simply to offer a high quality, sleek looking and durable outboard drive for the growing RC F1 (Formula One) gas tunnel market. Our exclusive design features an integral clutch for easier launching and retrieval, although this can be removed for more experienced racers who require the ultimate power-to-weight performance. When removed, the clutch is replaced by a provided square-insert collet.
The CNC billet outboard drive has a lustrous external finish whilst careful internal machining of any low-stress areas has removed surplus metal and reduced weight to the point that the complete unit weighs just 1150 grams. The prop shaft housing has a reverse (left-hand) thread and can be easily unscrewed from the lower leg for convenient inspection and lubrication.
Advanced hydrodynamic design has reduced drag through the water and allows the prop to avoid ventilation or blow-out and to operate at maximum efficiency for maximum thrust both on the straightaway and in turns.
Within the leg, it was installed with a Teflon tube combined with a grease nipple. This gives less friction and will give a longer life for the flexible drive shaft. We have also supplied a spare Teflon tube in the package. The same length of flex shaft, square at both ends, can be used whether or not a clutch is fitted, and a spare flex shaft is included with the F1-11 Drive package.
The front engine billet plate has a water-proof seal to keep the clutch housing dry during operation, and the ride plate is fitted with twin water pick-ups for efficient cooling of your power plant. A steering arm is included with a hardened steel steering pivot pin and heavy duty copper bushes to minimize wear and to avoid excessive vibration and trim set-up failure.
A fully adjustable bracket makes it easy to bolt the Drive to your boat's transom, and it is equally easy to manually adjust both for vertical height and prop thrust angle. This gives the unit excellent flexibility in tuning for the best possible performance of your hull. Additionally, the unique design of the adjustment bolts that determine your preferred prop angle make it easy to set them permanently.
When matched with our Billet XP254M II engine, the F1-11 Outboard Drive will give your outboard boat exceptional performance as well as making an eye-catching feature both on the water and when on display.

F1-11 Outboard Drive Features

 

The complete unit is precision-engineered and CNC-machined for high performance reliability, then anodized in
silver for a flawless appearance.

Within the leg, it was installed with a Teflon tube combined with a grease nipple. This gives less friction and will
give a longer life for the flexible drive shaft. We have also supplied a spare Teflon tube in the package.
Arrow Shark's exclusive design provides an integral clutch for easier launching and retrieval. However, this can be removed for even higher performance.
For convenience, the same length flex shaft is required whether or not the clutch is used. A spare flex shaft is included.
The transom mount bracket makes it easier to trim your boat for best performance with simple adjustment of both vertical height and prop thrust
An effective seal on the front engine billet plate prevents water entering the clutch housing during
The ride plate is fitted with twin water pick-ups for efficient cooling of your power plant. Props up to 80mm diameter can be fitted on an industry-standard 1/4inch shaft.
The steering arm features a hardened steel pivot pin and heavy duty copper bushes to minimize wear that could
lead to critical trim set up failure and excessive vibration.
The prop shaft housing is designed with a reverse (left hand) thread so it can be unscrewed for easy inspection
and lubrication.

In 2012 upgraded version of F1-11, there is a grease nipple was installed in the curved section of the flexible shaft. This better lubricates the shaft in its area of highest stress. You can now easily re-grease the shaft every time you refill
your gas tank.

Any 26cc marine engine with Zenoah-compatible mounts can be bolted to the F1-11 Drive without any modification. Arrow Shark's Billet XP254M engine is an ideal power plant.
The F1-11 Drive will be properly packed for shipping in a custom made foam box in order to protect the unit from any possible damage during transportation.

Gallery

 

Video

 

Owner Manual

 

spare parts
Non-Spring Clutch V3
Qty:
Price: $108.00

2015 Billet Mount V2
Qty:
Price: $128.00

27" Long 1/4" Flexible Shaft
Qty:
Price: $58.00

57" Fighter 2012 SV
Qty:
Price: $1428.00

Sold Out
Billet Carb Protector
Qty:
Price: $38.00

52" Flying Dragon 2012 SV
Qty:
Price: $1188.00

AS1668/2 Mod Prop
Qty:
Price: $53.00

Gas Mono Hardware Combo Kit
Qty:
Price: $298.00

AS6917/4 Mod Prop
Qty:
Price: $62.00

Aluminium Mono Boat Stand
Qty:
Price: $58.00


CNC Servo Adaptor (Price for 5)
Qty:
Price: $18.00

Billet Shaft Log & Oil Cup
Qty:
Price: $43.00


Scale Twin-Ram Trim Tabs
Qty:
Price: $68.00


SR512 Stingray Drive
Qty:
Price: $108.00


X-Pilot Fully Extendable Rudder
Qty:
Price: $108.00


This site is protected by copyright and trademark laws under US and international law.
All rights reserved©2012-2015 Arrow Shark Inc